Sand Pump

A: You don't need to run your filter all the time, but running it for at least a few hours a day will keep it clean and ensure your pool lasts a long time.

A: Running the pump during the hottest parts of the day helps to combat the effects of the sun, especially with deterring algae growth and removing bacteria and debris during peak swim times. Splitting up time into shorter intervals and running during the morning as well as in the evening may help to maximize efficiency.

A: Backwashing a sand filter too often could lead to cloudy water. Assuming that your pressure gauge is functioning properly, resist the urge to backwash a sand filter until it's climbed at least 5 psi higher than the clean pressure.

A: Do You Run a Pool Pump While Swimming? While you can run your pump while taking a dip, it is not necessary so long as it has been running recently enough to ensure the water is clean and debris-free.

A: A standard pool pump uses between 1500 and 2500 Watts of energy. And it typically runs a minimum of 8 hours a day to circulate and clean water. Assuming a 2000 Watt (approximately 2.5 horsepower) motor running 8 hours a day you will use 480 kWh a month.

A: Every 3-5 years
The professionals that recommend changing your pool filter sand argue that not only should you replace your sand every 3-5 years, but you should also clean it in the interim. The argument for changing the sand is based on the belief that sand does eventually wear down and become smooth.

A: You can determine if your pool sand filter is working by checking the pressure gauge. The pressure reading (PSI) should be between 10 and 25. The normal operating pressure of your pool depends on how big and powerful your pump is and how clean your filter is.